Pairing Flite Controller with Fliteboard Receiver
Hold the + button for 5 seconds until you feel Flite Controller vibrate and the words ‘Looking for new pair’ appears and scrolls across the screen.
Hold the butt of Flite Controller in the magnetic arming pad on the board receiver (both the pairing and arming position) at a 45° angle.
Continue to hold in this position for 10 seconds (or until the board is paired). Pairing is succesful when the flashing light blue LED stays on solid. The Flite Controller screen will also now show a 'Lock Symbol' (signifying the motor is safely locked), the battery percentage and virtual Gear 1.
DO NOT HOLD THE CONTROLLER IN THE ARMING POSITION FOR LONGER THAN NECESSARY. A 20 SECOND HOLD WILL PUT THE BOARD INTO SOFTWARE UPDATE MODE REQUIRING IT TO BE POWER CYCLED TO RESET IT.