Speed Limiting

  • Updated

To activate a speed limit:

  1. Hold mode on the Flite Controller to get to settings.
  2. Click mode to change between different settings.
  3. Ensure you are in the correct drive mode (Prop or Jet) as this will affect the speed limiter.
  4. Click the mode button until you see the speed limit screen.
  5. Press plus or minus to activate a speed limit. These go up in increments of 2km/h starting from 16km/h and going up to 34km/h.
  6. If you do not want to activate a speed limit, then select none.
  7. Once speed limit is selected hold mode to get back to normal riding view.

The speed limit is an aid and not a hard stop. Once the limit is exceeded it will gradually bring you back to your set speed limit.

Note the speed limiter requires good GPS signal and works best on larger Fliteboards or Flitescooter.

Was this article helpful?

0 out of 0 found this helpful



Article is closed for comments.