Folding Prop Maintenance

  • Updated

The Folding Prop is made from aircraft grade anodised aluminium. Similar maintenance to the eFoil should be applied. 

The Folding Prop should be cleaned with at minimum Freshwater after use. 

Periodically remove the Folding prop. Clean with a microfibre towel as well as WD-40 or Isopropyl alcohol. Salt can build up around both the pins that hold the blades in place as well as the back clamp that clamps around the propeller pin. Target these areas thoroughly. 

Refer to Folding Prop Removal and Installation Instructions  use care as blades are extremely sharp.

Was this article helpful?

1 out of 1 found this helpful

Comments

0 comments

Article is closed for comments.