• General Maintenance plus icon minus icon
  • Fliteboard is more than a surfboard. Similar to any other electric powered vehicle, it needs to be serviced regularly and maintained to ensure good working order and to prevent breakage.Please refe... See more
  • General Storage plus icon minus icon
  • 1. Keep Flitecell stored out of the reach of children and pets.2. DO NOT store the Flitecell near heat sources such as a furnace or heater. 3. DO NOT leave the Flitecell inside of a vehicle on hot ... See more
  • Fliteboard, PRO, ULTRA plus icon minus icon
  • Post ride 1. Open the board lid slowly, take care not to let it fall on the nose of the board. (If the lid is opened too far it may fall and damage the nose of the board). 2. After each ride, check... See more
  • Fliteboard AIR plus icon minus icon
  • Post ride 1.Wash the inflatable bladder with warm soapy water and dry before storage. 2.The inflatable bladder can remain inflated, or be deflated and stored on or off the carbon insert to suit you... See more
  • eFoil (mast) plus icon minus icon
  • Post ride 1. Disconnect the Flitecell power cables. 2. Disconnect the data cables, both receiver and Flitecell CANbus cable (Series 1). 3. Rinse thoroughly with clean fresh water after every use. D... See more
  • Flite Controller plus icon minus icon
  • Post Ride 1. Rinse the Flite Controller in fresh water to clean away salt and debris. Ensure a steady stream of fresh water is applied directly into the trigger housing. While doing so press and de... See more
  • Flitecell plus icon minus icon
  • Post Ride 1. Wipe Flitecell down with a wet cloth (freshwater), and clean Flitecell contacts and data connector with Contact Cleaner. 2. Flitecell is water resistant but it should remain dry where ... See more