TECHNICAL GUIDES – Fliteboard

Repairs, Parts installation & Troubleshooting

True Glide Installation Instructions

const dropboxLink = "https://www.dropbox.com/s/u07f9a1r0yehc4h/True%20Glide%20Instructions.pdf?dl=0";//Link to dropbox file const pdfFileDisplayName = " ";//Leave Blank const clientId = "9fddcd... See more

Troubleshooting Guide

Fliteboard starts to slow or go into ‘limp home' mode This is a sign your Flitecell is about to run down or over heat. Move out of the water and recharge your Flitecell. Refer to the Flitecell ch... See more

True Glide Prop Maintenance

True Glide Prop Installation and Care Instructions

Flitecell - 6 Monthly Checklist

Flitecell - balancing & optimisation

THE BATTERY MANAGEMENT SYSTEM (BMS) BALANCES AND OPTIMISES FLITECELL DURING EACH CHARGE CYCLE. IT IS RECOMMENDED TO LEAVE THE FLITECELL CONNECTED TO A POWERED OFF CHARGER AFTER A FULL CHARGING CYC... See more

Flitecell - Safety and Shipping

SAFETY Flitecell (battery) is a carefully engineered water resistant unit. If the battery is damaged (for example during transportation or handling) the seal may become compromised. A damaged batte... See more

Flitecell - Material Safety Data Sheets (MSDS)

Handle Installation

Wings - Cruiser 1800 and Cruiser Jet 1800 Compatibility | Series 1

The Cruiser 1800 and Cruiser Jet 1800 wings are not compatible with certain, non-reinforced masts. Installing a Cruiser 1800 or Cruiser jet 1800 wing on an incompatible mast can lead to potential ... See more

Ultra Footstrap Installation

Propeller Removal and Installation

Series 2, 2.2 + S3 Prop Guard Removal and Installation

Series 2 - Series 3 Pro Tail Cover Installation

Series 1 Prop Guard Removal and Installation

Series 1 Pro Tail Installation

Board Repairs

If subjected to damage, the epoxy construction boards (Fliteboard, PRO and ULTRA) can be repaired by your local surfboard repair specialist. The inflatable construction Fliteboard AIR may be repai... See more